Heat Sink Thermal Grease Cooler Cooling Fan Silicone Plaster Heat Sink Compound High Performance
| Attribute | Value | Test Method |
| Composition | Non-Vulcanized Silicone Oil and Thermally Conductive Filler Mixture | - |
| Color | White | Visual |
| Density(g/cc) | 2.8 | ASTM D792 |
| Usage Temperature(℃) | -40~150 | -- |
| Thermal | | |
| Thermal conductivity(W/m.K) | 1.0 | ASTM D5470 |
| Thermal Resistance(℃-in2/W)0.1mm@50psi) | 0.15 | ASTM D5470 |
Product feature
■ Thermal conductivity: 1.0~5.0W/m.K
■ No cure required
■ High reliability
■ extremely low volatilization loss, non drying and non melting, good material adaptability and wide temperature range (-50 ∽ +250 ℃)
■ High volume applications
Typical applications
■ Networking and Telecommunications
■ IT: Notebooks, Tablets, Memory Modules
■ it is suitable for heat transfer of electronic components, such as transistors, ballasts, thermal sensors, computer fans, heat transfer media, rectifiers and electrical thermal insulation materials in the gap between high-power transistors (plastic tubes), diodes and substrates (aluminum, copper plates)
■ Consumer Electronics: Gaming Systems, LCD TVs, Displays
Product Reminder
Packing specification
Packing specification: 30ml/ 1Kg 2Kg 10Kg
Instructions
Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60-80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.
Shelf life & Storage:
Shelf life of the product is 6 months after date of shipment. Store in a cool, dry, well ventilated place.
Product Tags:
|
|
UL Conductive Heat Sink Thermal Grease Multiscene Anti Insulation Images
|
